Search

Use this fixed, full-arch patient education model to allow you to provide a visual element when explaining to patients the benefits of using implants for denture stabilization.

• used to make an open-tray, implant-level, hexed non-impression • may also be used to fabricate multiple-unit bars • packaged with the direct coping screw (PXDCS)   Refer to the Prosthetic Technique Manual for impression technique details. 4.5mm (Green) Narrow Non-Hexed Open Tray (Direct)

For attaching copings to the Multi-unit abutments. Hand-tighten or torque to 15 Ncm with .050” (1.25mm) Hex Driver or Unigrip™ screw driver, depending on application. Titanium alloy. Included with copings where indicated but can also be ordered separately.

Multi-unit Try-in Abutments may be used to measure tissue thickness and verify proper prosthetic seating prior to final abutment seating. Each Try-in is laser marked from 1mm to 5mm to correspond with the Straight Multi-unit Abutment collar heights and can also be used as a measuring tool for other abutment types. Try-in can be carried to the site by hand or with an .050” hex driver and snaps into the implant. 3.0mm (Gray)

CAMLOG® Scanbody, for optical, 3-dimensional localization of CAMLOG® Implants in the mouth or CAMLOG® Lab analogs in the working model, incl. CAMLOG® Abutment screw, sterile.Before scanning, check that the scanbody is present in the design software library used to construct the restoration. Can also be used for Platform Switching. 3.8mm (Yellow) Camlog Digital PEEK

Indicated for use in fixation of cortical onlay grafts and meshes used in Guided Bone Regeneration. Also indicated for tenting of membranes used in Guided Bone Regeneration. Block grafting kits Ridge augmentation kits