Search

• used to make an open-tray, implant-level, hexed impression • packaged with the direct coping screw (PXDCS)   Refer to the Prosthetic Technique Manual for impression technique details. 3.5mm (Yellow) Hexed Open Tray (Direct) Wide

• offers an accurate implant-level impression for single or multiple units with an easy to use closed tray, pick-up technique • one-piece design can be placed by hand without any additional instrumentation • low profile 9.5mm coping height can be reduced down to 6.5mm without compromising accuracy of the impression • features a color-coded radiopaque titanium body that can be used to verify seating on a radiograph   Refer to the Prosthetic Technique Manual for impression technique details. 3.5mm (Yellow) Closed Tray (Indirect) Hexed Wide

• use for multiple-unit, screw retained, long term temporary restorations (>30 days) • when a Laser-Lok component is used and temporarily removed for impression making or other restorative procedures, keep the removed Laser-Lok component in sterile saline until reinserting into the site • packaged with an abutment screw (PXAS) • final torque to 30 Ncm utilizing .050” (1.25mm) Hex Driver Refer to the Prosthetic Technique Manual for technique details. 3.0mm (Gray) Laser-Lok Non-Hexed Titanium Alloy

For cement-retained, single- or multiple-unit prostheses; includes Abutment Screw; final torque: 30Ncm; used with Ball-top Screw as a closed-tray, hexed-timed impression coping; gold-colored Titanium Nitride (TiN) coating for tissue esthetics. 4.0mm Hexed

For cement-retained, single- or multiple-unit prostheses; includes Abutment Screw; final torque: 30Ncm; used with Ball-top Screw as a closed-tray, hexed-timed impression coping; gold-colored Titanium Nitride (TiN) coating for tissue esthetics. 5.0mm Hexed

Locator Implant Attachments are designed for use with overdentures or partial dentures retained in whole or in part by dental implants in the mandible or maxilla. Order by cuff height to match the height of the gingival tissue. The abutment will extend above the tissue by 1.8mm to allow the Locator Male to seat completely. Order one Locator Male Processing Set for each Locator Abutment (sold in packs of 2 or 10). Can also be used with tissue-level implants. Titanium Alloy. The Male Processing Package provides 3 choices of retention. The Replacement Males (clear, pink and blue) are used to restore implants with up to 10° of divergence (20° between implants). The Extended Range Replacement Males (green and red) accommodate divergences from 10° and 20° (40° between implants), and may be purchased separately. 3.0mm (Gray) 6mm