Search
Motor MX-i
Item #: BA-1600755-001
The high torque of the Bien-Air MX-i LED micromotor offers excellent working comfort, at high and low speeds. Its ceramic ball bearings also guarantee you exceptional service life and reliability. Brushless micromotor, max. torque 5 Ncm, 100-40,000 rpm, LED light, self-ventilated. Sterilizable without protection, compatible with Type E coupling as per ISO 3964 and Micro-Series instruments. Motors
5.7mm Try-in Multi-unit Straight Abutment
Item #: TRYPBMU
Multi-unit Try-in Abutments may be used to measure tissue thickness and verify proper prosthetic seating prior to final abutment seating. Each Try-in is laser marked from 1mm to 5mm to correspond with the Straight Multi-unit Abutment collar heights and can also be used as a measuring tool for other abutment types. Try-in can be carried to the site by hand or with an .050” hex driver and snaps into the implant. 5.7mm (Blue)
Internal Direct Coping Screw, Shallow Hex
Item #: PXDCSS
• packaged with all Direct Pick-up Copings, except 3.0mm platform, hexed, long (TP3DCL)
• short hex depth for easy removal of impression material
• may also be used to maintain the screw access hole during fabrication of a screw-retained provisional prostheses
• hand-tighten (10-15 Ncm) or torque to 30 Ncm (depending on application) utilizing .050” (1.25mm) Hex Driver
Titanium cap for bar abutment Ø 5.0/6.0 mm, for crown
Item #: J2259.6001
Titanium cap for crown for bar abutment, incl. prosthetic screw, light blue anodized, also for impression taking open tray.Component of the COMFOUR® Treatment Concept. 5.0mm (Blue) 6.0mm (Green) Camlog Conelog Open Tray (Direct) Titanium Alloy
Lab prosthetic screw for bar abutment Ø 3.3/3.8/4.3 mm
Item #: J4013.1601
Lab prosthetic screw for bar abutment, hex, brown anodized, also for Passive-Fit.Lab screws are to be used on working models only. Component of the COMFOUR® Treatment Concept. 3.3mm (Gray) 3.8mm (Yellow) 4.3mm (Red) Camlog Conelog Titanium Alloy
Easy Ti Abutment Pick-up Sleeve (pack of 3)
Item #: PXETPS
• use as a foundation to create a full contour wax-up for a lithium disilicate glass-ceramic pressed crown
• compatible with 3.5mm, 4.5mm and 5.7mm platforms
Refer to the Prosthetic Technique Manual for technique module. PEEK